BLNC 9:1 pulley system

Because you don't want 5 guys to pull for your longline.
Because you want to have fun on the line - not rigging it.
Because you don't want to carry heavy gear to your slackspot.

Our BLNC 9:1 pulley system is the strongest affordable longline pulley system on this planet. It combines:

• The strong BLNC 9:1 Pulley System
• Abrasion resistant pulley rope with PES core and Technora cover
• Our Power Pulley multiplier
• The awesome Rope Grabber
• Strong shackles to connect to your anchor

Do you need any special configuration you can't find here? Different rope? Different connectors? Drop us an email: slackshop@raed-slacklines.com - we will do our best to make you absolutely happy.

BLNC 9:1 Pulley System

We know you rather want to have fun on the line than rigging it. The well engineered design of the BLNC 9:1 slackline pulley system makes it the most efficient tensioning system ever seen in slacklining. The integrated zero friction brake and the built-in industry standard ball bearings allow tensioning longlines of more than 100 m with 1 person in less than 5 minutes. The times when 5 guys had to pull and sweat for 30 minutes to tension one line are over now. Easily attach shackles to the big connector holes and attach it to any type of anchor. Even a backup pin for the rope is included.  

Pulley Rope

The pulley system includes some very lightweight but robust 6mm rope with PES core and Technora cover. This rope is so strong and extremely abrasion resistant, yet very affordable.

Concerning rope length: 40m of rope is enough to tension 100m of low stretch webbing like Parsec or 40m of high stretch webbing like MOTM in a flat park for a high tension line. 60m of rope equals 150m / 60m, 80m of rope equals 200m / 80m, If you prefer saggy lines, you might need less rope. Of course the rope comes preinstalled, so you don't have to hassle around with assembling, knots and so on. You're ready to go slacklining!

Rope length depends on your line length and the tension you need to create to set your line up. You can calculate the rope length needed for your line in our slackline tension calculator

P.S.: the rope color may vary depending on availability.

Power Pulley Multiplier

The integrated Power Pulley and the double multiplier pulley with prusik cord give you additional strength of 5 strong men for your longest projects. It increases the strength of the base pulley system from 9:1 to 27:1 or even 45:1!

Rope Grabber

The patented Rope Grabber is an awesome piece of gear. It lets you grab any thin rope to pull it as hard as you can. But it's not like ascenders you might know from climbing. It has no movable parts so nothing can break. It weights only 52 grams. And it is extremely easy to use. If you used it once you will never want to miss it again - promised!